1. Wire drawing / tailing

Drawing and tailing are common problems in dispensing machines. The common reasons are that the inner diameter of the nozzle is too small, the distribution pressure is too high, and the distribution amount is too large. When the rubber head is opened, there will be a certain distance between the rubber head and the valve. If the distributor starts distributing immediately, there may be an area without glue in the middle, which may lead to wire drawing. The way to solve the problem of wire drawing in the distributor is to switch the glue in advance and delay the switch.

2. Glue breaking / uneven thickness

Generally, in addition to mechanical reasons such as plastic needles, the stability of the speed controlled by Suzhou dispensing machine is particularly critical. The automatic forward-looking motion control algorithm of the self-service dispenser controller has a real high-speed motion trajectory, which can ensure that the machine can continuously and smoothly remove glue in the dispensing process, avoiding uneven dispensing and glue fracture.

3. Corner diagonal

In the continuous track coating, the automatic dispenser closes the glue head before reaching the end point, and uses the remaining pressure excitation and glue solution to complete the track, so as to avoid accumulation and stretching at the end of the section.

In addition, the automatic dispensing control system perfectly combines drawing + machine + motion control + database management in the dispensing industry. Teaching is more intuitive, simpler, faster and more stable, and it can automatically, accurately and quickly assist in positioning in just a few seconds. Without any fixture positioning, it can be placed at will, which greatly improves the production efficiency. Precise positioning, support large workbench to place many different types of goods at one time, intelligent identification, support direct computer map, database storage and other functions.

In addition to the automatic dispensing control system, it can also solve the pain points on the dispenser, such as glue accumulation, elongation and fracture, and can also be perfectly applied to pouring, hardware coloring, spot drilling and other equipment.